ViewTube

Mark JUNE 15-16 in your calendar! OpenSauce is taking place again this June in San Francisco, which will be the greatest Maker & Creator show of the year. I'll, of course, be there again, and if you have a crazy and amazing project to show off, there is still the chance to get a table to exhibit:  https://opensauce.com/exhibit-application/ 
This won't only get you FREE ADMISSION for the whole weekend, but you'll also be able to join the FRIDAY NIGHT PRIVATE CREATOR PARTY!
So go ahead, fill out the form, and be part of the greatest event of the year! 

Amazing news for my left-handed friends: We finally got our custom-made lefty deburring blades in stock🎉! Optimized to effortlessly remove even the smallest sharp edge on your 3D prints. Only available at  http://cnckitchen.store/collections/tools  , as long as the supply lasts. Get yours now! 

*A quick update on yesterday's video about the Bambu Lab A1*
After my video went live, Bambu Lab reached out to say that they had a mistake in the marketing material they provided to testers and that the bed is NOT limited to 80 °C but can go all the way to 100 °C. I tested this today with the latest firmware, and lo and behold, you can set it to 100 °C, which I also confirmed with a thermocouple. The thermal camera shows the temperature distribution over the bed, dropping almost 10 K at the lower right corner. So, don't place any ABS parts in that area.
This, of course, significantly changes the competitiveness of this machine in a positive direction (and makes the P1P even more obsolete). I don't know if this was a last-minute change to make the A1 more attractive or just something they really missed.
If this convinced you to pick one up , you can check out the A1 here:   https://geni.us/BambulabA1  (Affiliate) 

I intentionally didn't spam you with random affiliate links the last few days because I'd rather promote our own stuff! Our Black Friday Week Sale just started at  https://cnckitchen.store/  with 10% off everything and we have some really cool new stuff!
🔩 superb quality Torx screws, so you can finally get rid of your annoying socket cap head screws
🌋V3 nickel-plated copper volcano adapters
🗡️ a deburring tool with special thin blades for plastic deburring
⚡️soldering tips for the most common soldering irons
💼LIMITED EDITION signed soldering iron tip cases 

Two great things to celebrate🎉🎉! The channel hit HALF A MILLION SUBSCRIBERS and we finally have our second batch of TS100 soldering tip adapters in stock (  https://geni.us/TS100InsertTool  )

I still can’t believe it’s true, but after six years of blood, sweat, and tears, we gathered a crowd of 500,000 makers, tinkerers, tech enthusiasts, or simply amazing subscribers on this channel, and I only have the words THANK YOU for this!

Besides our subscriber count, we were also able to grow our portfolio of accessories for 3D printing and makers significantly over the last year with our latest addition, the TS100 tips for our heat set inserts that you can now get in our shop:  https://geni.us/TS100InsertTool 

Since we reached 500k subscribers, we had to give you a bit of a discount with a “5” theme. Well, I'm honest, we can’t afford 50% off, and 0.5% would be laughable, so we settled on a shop-wide 5% discount for the whole weekend with coupon code: YT500k

Thanks again for everything!
Stefan 

Quick announcement: I'll be at the Rocky Mountain RepRap Festival in Loveland, CO (north of Denver) next weekend (April 22-23, 2023), which is going to be a big gathering of 3D printing geeks. It's admission free, so if you live in the area, consider joining all of us!
 https://rockymountainreprapfestival.com/ 

*CNC Kitchen in GERMAN / CNC Kitchen auf Deutsch*  https://www.youtube.com/@cnckitchen-de 
Nachdem seit Jahren von vielen Seiten der Wunsch gekommen ist meine Videos auf Deutsch zur Verfügung zu stellen habe ich Anfang des Jahres begonnen nach und nach meinen englischen Content auch auf Deutsch zu übersetzen und ihn auf einem neuen YouTube Kanal zu veröffentlichen. Wenn ihr also gerne meine Videos auf Deutsch ansehen wollt und Bock auf ein bisschen Cringe habt, dann schaut mal hier vorbei und abonniert den neuen Kanal:
 https://www.youtube.com/@cnckitchen-de 
Ich würde gerne auch in Zukunft meine englischen Videos eine Woche später auch auf dem neuen Kanal veröffentlichen. Leider schaffe ich das zeitlich nicht immer, ich tue jedoch mein Bestes, das in der Zukunft konsistenter zu machen. Wenn jemand von euch eine (bezahlte) Zusatzbeschäftigung sucht und mich dabei unterstützen möchte, technisches Verständnis hat und DaVinci Resolve bedienen kann, dann schriebt mir bitte eine Mail (E-Mail auf meiner Webseite).
English TLDR: I've now also got a German channel where I want to post videos always a week after the main English release.


In dem Sinne frohe Ostern!
Stefan 

👜BLACK FRIDAY SALE👜at  https://cnckitchen.store/  ! FREE shipping in GERMANY and worldwide shipping for only 6.90€!
The family is finally complete, and we've now got heat set inserts from M2 - M6 and the often-requested 1/4-20 camera threads in stock. The only lead-free🌳 brass inserts on the market specially made for your FDM and resin prints! Get threaded inserts in the size you need, and also add our custom soldering tips for easier installation. 

Which is the 3D printing slicer that you use the most? 

I’m pretty excited to announce that we are finally launching our first products (currently EU only):  https://geni.us/CNCKitchenInserts  ! Due to the constantly increasing demand for high-quality heat-set inserts, we’ve been looking for a reliable partner to manufacture them for us. After half a year of proper research and testing, we found a suitable candidate and have now received the first batch!

For the moment, you can purchase our threaded inserts from many EU countries on AMAZON. We’re working hard to make them available worldwide and will keep you posted on the progress!

We currently have the typical M3, M4, and M5 inserts in stock, as well as short versions of them if you’re space is tight. Due to popular demand, we also have 1/4”-20 inserts used as camera threads on most consumer cameras and your GoPro.

Let us know if you like them, and if you purchase a bag, please leave an honest review on AMAZON!
I've also created a blog post with additional tips on how to properly use the inserts:  https://geni.us/CNCKInsertsTips