In this video we'll be making some really charming mushroom lights! Parts list and links below ↓↓↓ Disclosure: These are affiliate links. If you click them and make a purchase from the various merchants they link to, DIY Perks may earn a commission. Affiliate programs and affiliations include, but are not limited to the eBay Partner Network and Amazon Associates. Here are the LEDs we'll need to make this: http://amzn.to/2BIZG1c Please note that the LEDs are wired in series on these strips, hence the 12v rating. The LEDs themselves are NEVER 12v individually, and are all in the 1.8v - 3.4v range. Also, if they have waterproofing silicone on top, just peel it off after cutting. Battery box for 3x AA batteries, with built-in switch: US eBay - Battery Holder: https://ebay.us/s9eyQj UK eBay - Battery Holder (UK / EU): https://ebay.us/U2VLrJ Silicone not drying in your plastic wrap? Try this: https://docs.google.com/document/d/1aGqcsWVCbqGNWEJ_ACXB2nDaO_D7mZL1b6vKPEQBO20/edit?usp=sharing Parts List: SMD LEDs (links above if you can't find any locally) Resistors (value calculated in the video) Clear silicone and watercolour paints Thin wire and stiff wire Wood (driftwood, bark, etc) For this project we'll also need need the following tools: Plastic food wrap Scissors, wire cutters, and small pliers Soldering iron and solder Drill OFFICIAL LINKS: Support me on Patreon: https://www.patreon.com/DIYPerks/ Official Website: https://www.diyperks.com/ Discord: https://diyperks.com/discord-server/ Forums: https://diyperks.com/community/ Twitter: https://twitter.com/DIYPerks