I built another multisensor for the bedroom and I decided to change up a few components. Dive in and take a step by step approach to build it with Otto Winter's ESPHome software this time around as it's been a year since I built the initial Bruh Automation version. ESPHome is easy to use and configure; No Arduino IDE, no coding, just a config file and the sensors wired up! ⚡Parts Used⚡ NodeMCU - https://geni.us/fn4BL TSL2561 LUX Sensor - https://geni.us/Uef8mzV Jumper Wires - https://geni.us/d3r9O AM312 Motion Sensor - https://geni.us/OiewrL3 5mm Neopixel - https://geni.us/go3Gk25 or 8mm Neopixel - https://geni.us/kninEgN DHT22 Temp/Humidity - https://geni.us/v3jPH Dive into the fun world of 3D printing! https://geni.us/0hId2 ⚡Products We Use/Recommend⚡ Amazon US - https://amzn.to/2YZNDeO Amazon UK - https://amzn.to/2TnG2R4 Amazon CA - https://amzn.to/2JWsNq5 ⚡Be Social!⚡ Main Website - https://www.digiblur.com/ Discord Chat - https://discord.digiblur.com/ Patreon - https://patreon.digiblur.com/ Facebook - https://facebook.digiblur.com/ Instagram - https://instagram.digiblur.com/ Please note, the product links above could be affiliate links, using them could earn digiblurDIY a small commission of most purchases and helps with future video projects. Thank you! Sample ESPHome YAML (replace the IP address and WiFi information) esphome: name: sensor_node1 platform: ESP8266 board: nodemcuv2 wifi: ssid: 'yourWIFIhere' password: 'yourPASShere' manual_ip: static_ip: 10.10.1.40 change this IP and remove this message gateway: 10.10.1.1 subnet: 255.255.255.0 dns1: 10.10.1.1 dns2: 10.10.1.1 Enable logging logger: Enable Home Assistant API api: ota: sensor: - platform: dht pin: D7 model: dht22 temperature: name: "SenseNode Temp" humidity: name: "SenseNode Humidity" update_interval: 30s - platform: tsl2561 name: "SenseNode LUX" address: 0x39 update_interval: 5s binary_sensor: - platform: gpio pin: D6 name: "SenseNode Motion" device_class: motion on_press: then: - light.turn_on: ESPD4led on_release: then: - light.turn_off: ESPD4led light: - platform: neopixelbus type: RGB variant: WS2811 pin: D3 num_leds: 1 name: "SenseNode LED" - platform: binary name: "SenseNode D4Led" output: D4led id: ESPD4led i2c: sda: D2 scl: D1 scan: False output: - platform: gpio pin: D4 id: D4led inverted: True ⚡3D Cases Used⚡ https://www.thingiverse.com/thing:2361388 https://www.thingiverse.com/thing:2477685 Huge shout out to Bruh Automation for starting me on this ESP8266 journey on the first version of this multisensor a year ago. Please note, the product links above could be affiliate links, using them could earn digiblurDIY a small commission of purchases potentially helping with future video projects. Thank you! As an Amazon Associate I earn from qualifying purchases. Please note, the product links above could be affiliate links, using them could earn digiblurDIY a small commission of most purchases and helps with future video projects. Thank you! As an Amazon Associate I earn from qualifying purchases.